Self Study Guide- OSPF Routing Protocol Terminologies
We would be discussing the ways for clearing. I would suggest you focus on the below-mentioned resources and also check out the CCNP 300-835 CLAUTO Dumps offered at the ExamClubs, they are the best when it comes to Certifications Vendor.
Networking Technology has made a huge impact on the world since last decade, changing every day’s lifestyle to organizations growth and processes. Having so massive reach is not easy to cover and learn under one domain hence divided into ten with levels to define the expertise.
|Data Center||Data Center||Data Center|
|Service Provider||Service Provider||Service Provider|
List of levels and domains of Cisco Certifications
Generally, starting from Associate level Certifications, networking aspirants move onto the Professional ones with Expert Level Certifications at last. Having many topics and concepts in common, the comprehensive knowledge and precise technology go deeper with the levels.
For example, one such concept is OSPF Routing Protocol. OSPF Routing Protocol is one of the major protocols of CCNA which requires a lot of hands-on session and guidance from the experienced. OSPF Protocol is one of the most important protocols which help in routing. It is explained a little bit in CCNA and more in CCNP and CCIE.
OSPF is classified as a routing protocol which helps in best path selection with the help of some predefined algorithm i.e. SPF. We study the basic concepts of OSPF in CCNA like why prefer it to other protocols, what are the advantages of using OSPF in the network, but in CCNP and CCIE, we study the actual working of OSPF-like, detailed information of LSA, Virtual-Link, Redistribution, filtering methods etc.
Here are few of the OSPF Protocol Terminologies to help you out with this major protocol working.
Stands for Open Shortest Path first. It is a dynamic Link State routing protocols that share the database information within a domain. All routers calculate the best path by their own. No dependency on neighbor like it was in Distance Vector Routing Protocols.
Links State Routing Protocols; protocols that send the information on the basis of the state of the link. They keep a complete map of the network.
Clearing the Certification isn’t considered to be that much easy, you have to go through rigorous training and lots of CCNP 010-151 Dumps would be needed to go through unless you have some expertise training courses like such offered at the ExamClubs.
Shortest Path First; an algorithm used by OSPF routers to calculate the best path. SPF execution is done on Link State Database which is maintained by each OSPF router individually. It is also known as Dijkstra’s algorithm.
Two or more routers which are sharing the same subnet IP address on the connecting links. Generally referred as directly connected routers.
Adjacency is formed when two or more OSPF routers have exchanged all the information required to build the routing table.
An IPv4 address which defines the router in an OSPF network. It is used to create virtual-links, LSDB and in some other places. It can be manually configured or it can be any IP address of the highest loopback interface, if not present it can be any IP of an active physical interface.
- Area id:
It defines the logical division in OSPF. In OSPF we can create multiple areas to make it more scalable and to control the rapid SPF calculation on all the router if one router has made some changes.
In OSPF, information is exchanged in the form of Link State Advertisements. There are 11 types of LSA available, however LSA 9, 10, 11 area application-specific. Each LSA has a name, Router LSA, Network LSA, Summary LSA, ASBR Summary LSA, External LSA, Not-so-stubby-area LSA to name a few.
Links State Database is the place in OSPF, where it keeps the information of LSAs. Further SPF algorithm is run on LSDB to calculate the best path. Remember that in OSPF, a router doesn’t rely on the neighbor for best path. It will calculate it automatically.
Cost is the metric of OSPF. It is the best path selection criteria. Cost is 100/BW (in Mbps). Lower cost to reach the destination is always preferred.
Priority: Priority can be used to manipulate the DR/BDR Election. Higher priority is always preferred.
Area Border Router is a router who is connecting to Areas, one of which is a transit Area.
Autonomous System Boundary Router connecting an OSPF router to any other routing domain. Redistribution is performed here.
- Area Types:
There can be multiple types of areas present in the network. In multiple area OSPF, all the regular area must be connected with Area 0. Some Area types like Regular Area, Backbone Area, Stubby Area, Totally stubby area, not so stubby area.
- E1 E2 Routes:
E1-E2 routes area generated in the response of Redistribution. A router will receive a redistributed route with either E1 or E2 type. E1 represents total cost to reach ASBR + to reach the destination. But E2 will only represent cost from ASBR to the destination. It is the default for redistributed routes.
- Virtual Links:
Virtual-Link is used to connect a regular area with backbone area if it is not connected.
- Hello Time:
The time period in within which a router in OSPF is required to send Hello packets to check if the neighbor is up or not. By default, it is 10 sec. Can vary depending on Network Type.
- Dead Time:
If a router stops receiving hello on any interface, it is going to start its’ hold timer. In a normal network scenario, it is 40 sec and it can exceed, depending on Network type in OSPF.
- Self-Study Guide: Cisco VPN
- Networking Concepts: Configuring DHCP in Cisco Packet Tracer
- Networking Concepts: Introduction to Cisco Packet Tracer
- Networking Concepts: IP Routing Protocols
Acquiring the certification isn’t going to be an easy task, but if you have the expertise help of the CCNP 640-692 Dumps offered at the ExamClubs, you would be able to achieve it in a single attempt.